RCSCALEBUILDER.COM - 1/3 Scale JW Sopwith Triplane

Home>Forums>Show Your Stuff!!!>1/3 Scale JW Sopwith Triplane

Search Within This Topic

Post Reply New Topic

Forum Jump

2 Pages 1 2

Author / Post

	john689971 Basic Member	Joined: November/10/2003 United States Posts: 304 IP Logged
Posted: November/23/2020 at 10:27am		Quote

My completed 1/3 JW sopwith triplane with 160 cc five cylinder rotary engine. Successfully flown yesterday

__________________
John Elliott
1/4 scale GTM DVI - flying
1/3 JW Sopwith Triplane - Flying
1/3 GTM Fokker EV-in process
Full-Scale Fokker Triplane (finally!)

	john689971 Basic Member	Joined: November/10/2003 United States Posts: 304 IP Logged
Posted: November/23/2020 at 10:30am		Quote

Photos courtesy of Carl Becker. Plane weights 38 pounds, covered in solaretex with latex house paint sprayed on. 32x18 prop at 2400 rpm. Flight video here:

https://youtu.be/UiMhWoVROU8

Has some trouble with the rudder gyro but a great flier and good kit. I added some additional scale details and changed the flying wires, etc.

__________________
John Elliott
1/4 scale GTM DVI - flying
1/3 JW Sopwith Triplane - Flying
1/3 GTM Fokker EV-in process
Full-Scale Fokker Triplane (finally!)

	ARUP Lifetime Site Supporter	Joined: December/10/2009 United States Posts: 1597 IP Logged
Posted: November/23/2020 at 11:04am		Quote

My favorite airplane! Awesome model and thanks for posting!

	BobH Site Supporter	Joined: October/24/2003 United States Posts: 5901 IP Logged
Posted: November/23/2020 at 11:12am		Quote

John,

I know this is the fullfilment of a life long dream. The powering of a WWI plane with a genuine Rotary engine.

Congratsulations to you for sticking to your dream and seeing it through.

	Teus Lifetime Site Supporter Dutch Dawn Patrol	Joined: December/09/2006 Netherlands Posts: 3642 IP Logged
Posted: November/23/2020 at 11:36am		Quote

Congratulations John, your Triplane is awesome. Power seems adequate but balance needs some fine tuning I think. Glad everything is fine and now time to enjoy.

__________________
Teus

Building board:
Nieuport-11 + rotary engine

Flying:
1/4 Proctor Fokker E.III
1/3rd Fokker D-VII
1/3rd Nieuport-11

In maintenance:
a 1982 Busa build 1/3rd Sopwith Pup

	john689971 Basic Member	Joined: November/10/2003 United States Posts: 304 IP Logged
Posted: November/23/2020 at 11:55am		Quote

Here is new video link with some ground shots...

https://youtu.be/oGBVAfiMUnk

__________________
John Elliott
1/4 scale GTM DVI - flying
1/3 JW Sopwith Triplane - Flying
1/3 GTM Fokker EV-in process
Full-Scale Fokker Triplane (finally!)

	bmorey Site Supporter	Joined: August/18/2014 United States Posts: 219 IP Logged
Posted: December/21/2020 at 2:14pm		Quote

Beautiful triplane! That engine is supremo. Seemed to struggle a little getting airborne.

Would not think it would be underpowered?

Awesome plane..

	john689971 Basic Member	Joined: November/10/2003 United States Posts: 304 IP Logged
Posted: December/21/2020 at 2:25pm		Quote

Thanks! We were running at about 2,300 rpm for the first flight. We will lean it out for 2,500-2600 next but it does climb out at 2,300 though ok. I have since dialed down the rudder gyro which was over sensitive and causing some skidding around.

__________________
John Elliott
1/4 scale GTM DVI - flying
1/3 JW Sopwith Triplane - Flying
1/3 GTM Fokker EV-in process
Full-Scale Fokker Triplane (finally!)

Forum Jump

2 Pages 1 2

Post Reply New Topic

Similar topics you might be interested in...

1/3 Scale Sopwith Triplane

1/3 scale Sopwith Triplane

1/4 scale Sopwith Triplane

1/3 Scale Sopwith Triplane - Another one!

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Portal Home Forum Icon

Forum Home Forum Icon

Your Privacy