RCSCALEBUILDER.COM - BUSA 1/4 scale DR.1

Home>Forums>Show Your Stuff!!!>BUSA 1/4 scale DR.1

Search Within This Topic

Post Reply New Topic

Forum Jump

Author / Post

	flyboywbl Lifetime Site Supporter	Joined: July/08/2015 United States Posts: 861 IP Logged
Posted: May/30/2021 at 1:02pm		Quote

I finally finished/flew my 1/4 scale DR.1 I started 10/14/20. My intent was a quick easy sport scale plane.

It is powered by a G-26 converted to electronic ignition, B&B muffler and a 16 oz fuel tank. It's swinging a Xoar Axial 18x6 prop at around 8000rpm

I used Hitec MG-645's all around. I use duel FRSky receivers the R8 as primary and the M+ in the tail as a satellite. These are mixed through a FRSky redundancy bus 10.

There are two 2500mah A123 batteries on the bus. The ignition is run off a channel using a TechAero IBEC.

The pilot is from Aces of Iron I painted with acrylic paint.

The airframe is covered with Solartex linen and painted with Rustolium 2x paint. The vinyl is from Callie Graphics. I used Minwax Satin Polyurethane spray to seal it.

It has a functional spring loaded tail skid and pull pull elevators and rudder. The are fake aileron pull cables on the top of the ailerons.

The guns are Balsa USA kits.

Still getting used to it but I love how it looks and flies.

Maiden flight video here
https://youtu.be/LPP625AogTg

Cockpit video here
https://youtu.be/0nJsbedk-pk

My next fun summer project is a Tower Uproar 60 with NGH 17cc engine

This fall I will start Top Flite Corsair with Saito FG-90 radial.

__________________
Matt Morley, Mahtomedi MN

"Small facts lead to great knowing" -Patrick Rothfuss

	Bob LaBrash Lifetime Site Supporter	Joined: January/26/2010 United States Posts: 83 IP Logged
Posted: May/30/2021 at 1:40pm		Quote

Good Job, Matt!

I've enjoyed following your build and the watching the initial flight. Good job with the video too. I'm looking forward to your Corsair build coming up.

Bob LaBrash

__________________
Just one more flight...it's not dark yet.

	flyboywbl Lifetime Site Supporter	Joined: July/08/2015 United States Posts: 861 IP Logged
Posted: May/30/2021 at 7:30pm		Quote

Quote: Bob LaBrash

Good Job, Matt!

<br>

I've enjoyed following your build and the watching the initial flight. Good job with the video too. I'm looking forward to your Corsair build coming up.

<br>

Bob LaBrash

Thanks Bob! It was lots of fun.

Can't wait to build the F4U. Maybe we can fly ours together.

Happy flying!!

-Matt

__________________
Matt Morley, Mahtomedi MN

"Small facts lead to great knowing" -Patrick Rothfuss

	Neil S Site Supporter	Joined: January/20/2012 New Zealand Posts: 1412 IP Logged
Posted: June/02/2021 at 4:38pm		Quote

Nice work Matt.

Great to see a younger guy enjoying the hobby. Bring on the Corsair.

Neil

__________________
Flying:
Brian Taylor Spitfire MkIX
Top Flite P47 GS
1/4 MR Sopwith Pup

Building:
BT Mosquito PR XVI @ 1:6.5 scale

	flyboywbl Lifetime Site Supporter	Joined: July/08/2015 United States Posts: 861 IP Logged
Posted: June/04/2021 at 3:58pm		Quote

Quote: Neil S

Nice work Matt.

Great to see a younger guy enjoying the hobby. Bring on the Corsair.

<br>

Neil

<br>

Thanks! Gotta keep the hobby alive. I've been buying up and stockpiling kits so I have something to do if I ever retire.

__________________
Matt Morley, Mahtomedi MN

"Small facts lead to great knowing" -Patrick Rothfuss

Forum Jump

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Post Reply New Topic

Similar topics you might be interested in...

BUSA 1/3 scale Dr.-1

Balsa USA 1/3 scale DR.I

BUSA 1/4 scale N-28

BUSA 1/4 Scale Pup

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Portal Home Forum Icon

Forum Home Forum Icon

Your Privacy