Click logo to return to home page. ]

 
Home>Forums>Show Your Stuff!!!>Carb DA 50 or any carb Search Within This Topic   
Post Reply   New Topic   
Forum Jump  
] ] ]
]
Author / Post
Avatar User Offline Corsair1964
Basic Member
Basic Member
 Joined: June/18/2011
National Flag of Canada Canada
Posts: 8
IP Logged
Posted: August/24/2018 at 7:18pm  Quote
 
Hi
I have been flying P47 Thunderbold a lot of years , every year after the second year of flying the mixture change overtime of each summer what I finally notice was that the carb bolts came loose , after an engine failure and a successful dead stick I decided to figure out the issue and stop it from happening. Wish DA had this simple solution from the get go . Wire the bolts-attached is a picture .


__________________
Have a good flight, 60 thousand and climbing
https://goo.gl/photos/N9awzz6wVnRkiUhw7
 
Back to Top  Printer Friendly Version  Profile  Search  Web 
 
Avatar User Offline moggy
Basic Member
Basic Member
 Joined: November/13/2009
National Flag of United States United States
Posts: 191
IP Logged
Posted: August/24/2018 at 7:47pm  Quote
 
Have you tried Teflon tape on the threads?

__________________
In the hangar: 2 YA Spitfires,
Giant Stinger.Building: Ziroli Spitfire. In the Que: BT Spitfire MK V

"You can teach monkey's to fly better than that."
 
Back to Top  Printer Friendly Version  Profile  Search 
 
Avatar User Offline Sparky
Lifetime Site Supporter
Lifetime Site Supporter
Head Curmudgeon 		Joined: February/10/2004
National Flag of United States United States
Posts: 7343
IP Logged
Posted: August/24/2018 at 9:25pm  Quote
 
Clean bolts and holes with acetone and use blue Loc-Tite.... and since you have the holes drilled go ahead and add safey wire.
Belt and suspenders
Sparky


__________________
Brown County, Indiana
TopRC FW-190, Zenoah GT-80
Bates F6F Hellcat, Saito FG60-R3
Gamma RIP

 
Back to Top  Printer Friendly Version  Profile  Search 
 
Avatar User Offline kuhn
Site Supporter
Site Supporter
 Joined: February/08/2009
National Flag of Bulgaria Bulgaria
Posts: 2986
IP Logged
Posted: August/25/2018 at 2:10am  Quote
 
Line the holes you drilled in the red bolts up and push a sturdy wire right through both and bend the ends a bit.

Simple and secure.

No it wont make a difference to the air sucked in.


__________________
Kuhn

If in doubt. Don't!
Flying: HIGH!
Building: Getting my Mo Jo back slowly to finish a few projects.
 
Back to Top  Printer Friendly Version  Profile  Search 
 
 ]
] ]
Forum Jump  

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

 

  Post Reply   New Topic   

] ] ]
]
   ]
Similar topics you might be interested in...
Carbon Fibre Tube for Landing Gear
Hangar 9 .50 Corsair
Carf Mig 15 or others
newby to the forums and club
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum
]
] ]

Home Icon Portal Home   Forum Icon Forum Home   Forum Icon Your Privacy

Copyright © 2003-2024, RCSCALEBUILDER.COM, All Rights Reserved